Configuration Routeurs Numéris Zyxel
type Prestige 100H
Pour l'accés aux Inforoutes de
l'Ardèche via Numéris avec un routeur ZyXel Prestige 100H.
Connectez le routeur à un PC via le port série avec le cordon fourni.
Lancez un logiciel de communication type Kermit, Hyperterminal, etc ...
Paramètrage de la liaison : 9600 bauds, 8 bits, sans parité.
Envoyer un Retour Chariot.
Le routeur demande un mot de passe.
Mot de passe par défaut : 1234
Ecran Principal
Copyright (c) 1994 - 1998 ZyXEL Communications Corp.
Prestige 100IH Main Menu
Getting Started Advanced Management
1. General Setup 21. Filter Set Configuration
2. ISDN Setup
3. Ethernet Setup 23. System Security
4. Internet Access Setup 24. System Maintenance
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
13. Default Dial-in Setup
14. Dial-in User Setup
15. SUA Server Setup 99. Exit
Enter Menu Selection Number:
Suivre l'ordre des menus suivant :
Menu 1 Informations Générales
Menu 1 - General Setup
System Name= ZyXel
Location= Votre_Ville
Contact Person's Name= Votre_Nom
Route IP= Yes
Press ENTER to Confirm or ESC to Cancel:
Menu 2 Configuration Numéris
Menu 2 - ISDN Setup
Switch Type: DSS-1
B Channel Usage= Switch/Unused
ISDN Data = Subaddress=
A/B Adapter 1 = Subaddress=
A/B Adapter 2 = Subaddress=
Dial Prefix to Access Outside Line=
PABX Number (Include S/T Bus Number)=
Incoming Phone Number Matching= Multiple Subscriber Number (MSN)
Analog Call Routing= N/A
Global Analog Call= N/A
Advance Setup = No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Modifier la ligne B Channel Usage en Switch/Unused pour
n'utiliser qu'un seul canal à 64Kbits.
Menu 3 Configuration Ethernet
Menu 3 - Ethernet Setup
1. General Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Menu 3 - 1 Configuration des Filtres
Menu 3.1 - General Ethernet Setup
Input Filter Sets=
Output Filter Sets=
Press ENTER to Confirm or ESC to Cancel:
Ne rien toucher !
Menu 3 - 2 Configuration TCP/IP et DHCP
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup:
DHCP= Server
Client IP Pool Starting Address= 192.168.1.100
Size of Client IP Pool= 32
Primary DNS Server= 195.101.206.1
Secondary DNS Server= 195.101.206.5
TCP/IP Setup:
IP Address= 192.168.1.254
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2B
Press ENTER to Confirm or ESC to Cancel:
Server DHCP configuré pour 32 machines ( maximum ! )
de 192.168.1.100 à 192.168.1.132.
L'adresse IP du routeur sur le réseau est 192.168.1.254
Menu 4 Configuration de l'accés Internet
Menu 4 - Internet Access Setup
ISP's Name= Inforout
Pri Phone #= 0475291000
Sec Phone #=
My Login= votre_login
My Password= ******
Single User Account= Yes
IP Addr= 0.0.0.0
Telco Option:
Transfer Type= 64K
Multilink= Off
Press ENTER to Confirm or ESC to Cancel:
Le numéro d'appel Numéris est le 04 75 29 10 00
Entrez ici le login et le mot de passe qui vous a été affecté.
Do you wish to perform the Internet Setup Test[y/n]: n
Attendre pour faire le test.
Menu 11 Paramétrage de l'accés Internet
Menu 11 - Remote Node Setup
1. Inforout (ISP, SUA)
2. ________
3. ________
4. ________
Enter Node # to Edit:
Choisir 1
Menu 11 - 1 Paramétrage de l'accés Internet
Menu 11.1 - Remote Node Profile
Rem Node Name= Inforout Edit PPP Options= No
Active= Yes Rem IP Addr= 0.0.0.0
Call Direction= Outgoing Edit IP= No
Incoming: Telco Option:
Rem Login= Transfer Type= 64K
Rem Password= ******** Allocated Budget(min)= 0
Rem CLID= N/A Period(hr)= 0
Call Back= N/A
Outgoing: Session Options:
My Login= votre_login Input Filter Sets=
My Password= ******** Output Filter Sets=
Authen= CHAP/PAP Call Filter Sets=
Pri Phone #= 0475291000 Idle Timeout(sec)= 300
Sec Phone #=
Press ENTER to Confirm or ESC to Cancel:
Changez la ligne Edit PPP Options en Yes
Menu 11 - 2 Paramètres PPP
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= Yes
Multiple Link Options:
BOD Calculation= Transmit or Receive
Base Trans Rate(Kbps)= 64
Max Trans Rate(Kbps)= 64
Target Utility(Kbps)= 32-48
Add Persist(sec)= 5
Subtract Persist(sec)= 5
Enter here to CONFIRM or ESC to CANCEL:
Menu 23 - 1 Changement du mot de passe
Menu 23.1 - System Security - Change Password
Old Password= *********
New Password= *******
Retype to confirm= *******
Enter here to CONFIRM or ESC to CANCEL:
Mettre ici le mot de passe vous permettant de configurer le routeur
Menu 24 Tests de connexions
Menu 24 - System Maintenance
1. System Status
2. System Information and Terminal Baud Rate
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Software Update
8. Command Interpreter Mode
9. Call Control
Menu 11.1 - Remote Node Profile
Menu 24 - 4 Test de la connexion
Menu 24.4 - System Maintenance - Diagnostic
ISDN System
1. Hang Up B1 Call 21. Reboot System
2. Hang Up B2 Call 22. Command Mode
3. Reset ISDN
4. ISDN Connection Test
5. Manual Call
TCP/IP
11. Internet Setup Test
12. Ping Host
Enter Menu Selection Number:
Manual Call Remote Node= N/A
Host IP Address= N/A
Choisir l'option 12 puis entrez une adresse IP de machine
sur l'Internet. exemple 195.101.206.1.
Résultat correct du test
Start connection. Wait for 6 seconds for next PING
Resolving 195.101.206.1... 195.101.206.1
Dialing chan<1> phone(last 9-digits):475291000
Call CONNECT speed<64000> chan<1> prot<1>
LCP up
CHAP login to remote OK!
IPCP negotiation started
CCP negotiation started
CCP up
IPCP up
195.101.206.1 (230 ms) seq=1
### Enter y to send next PING. any other key to return ###
Ecran 24 - 1 Status en connexion
Menu 24.1 - System Maintenance - Status
CHAN Link Type TXPkt RXPkt Error CLU ALU Up
Time
B1 Inforout 64Kbps 30 28 0 0% 0%
0:02:15
-- N/A 0Kbps 0 0 0 0% 0%
0:00:00
Total Outcall Time: 0:02:15
Ethernet (V 1.00) WAN
Status: 4 Ports Hub B1 IP Addr: 195.101.206.202
TX Pkt: 20 B2 IP Addr:
RX Pkt: 0 B1 CLID:
Collision: 0 B2 CLID:
LAN Packet Which Triggered Last Call:
Press Command:
COMMANDS: 1-Drop B1 2-Drop B2 3-Reset Counters 4-Drop All ESC-Exit
Voila, c'est simple !
Votre routeur est maintenant opérationnel.
